<sub id="l1jhx"><dfn id="l1jhx"></dfn></sub>

<sub id="l1jhx"><dfn id="l1jhx"></dfn></sub>

<sub id="l1jhx"><var id="l1jhx"><ins id="l1jhx"></ins></var></sub>

    <address id="l1jhx"></address>

    <address id="l1jhx"><dfn id="l1jhx"></dfn></address>

    <address id="l1jhx"><dfn id="l1jhx"></dfn></address>

    <sub id="l1jhx"><var id="l1jhx"><mark id="l1jhx"></mark></var></sub><sub id="l1jhx"><var id="l1jhx"><ins id="l1jhx"></ins></var></sub><sub id="l1jhx"><var id="l1jhx"><output id="l1jhx"></output></var></sub><sub id="l1jhx"><var id="l1jhx"><ins id="l1jhx"></ins></var></sub>
      <sub id="l1jhx"><var id="l1jhx"><ins id="l1jhx"></ins></var></sub>

      <address id="l1jhx"></address>

      <sub id="l1jhx"><var id="l1jhx"><ins id="l1jhx"></ins></var></sub>
        <sub id="l1jhx"><dfn id="l1jhx"></dfn></sub>
        首頁 >技術支持 >技術支持詳情

        專業術語解釋(三)

        發布時間:2018-08-08 發布人:匿名

        Parameters For NLO Crystal Selection

         

        NLO Process Phase-Matching Type and Angle, deff

        Power or Energy, Repetition Rate Damage Threshold Divergence Acceptance Angle Bandwidth Spectral Acceptance

        Beam Size Crystal Size, Walk-Off Angle

        Pulse Width Group Velocity Mismatching

        Environment Moisture, Temperature Acceptance

        Crystal Acceptance

        If a laser light propagates in the direction with angle  θ to phase matching direction, the conversion efficiency will reduce dramatically (see the figure right ). We define the acceptance angle (θ) as full angle at half maximum (FAHM), where θ = 0 is phase-matching direction. For example, the acceptance angle of BBO for type I frequency doubling of Nd:YAG at 1064 nm is about 1 mrad-cm. Therefore, if a Nd:YAG laser has beam divergence of 3 mrad for frequency-doubling, over half of the input power is useless. In this case, LBO may be better because of its larger acceptance angle, about 8 mrad-cm. For NCPM, the acceptance angle is normally much bigger than that for CPM, for example, 52 mrad-cm1/2 for type I NCPM LBO.

        In addition, you have to consider the spectral acceptance (λ) of crystal and the spectral bandwidth of your laser; crystal temperature acceptance (T) and the temperature change of the environment.

        12.png

         Walk-Off

        Due to the birefringence of NLO crystals, the extraordinary wave (ne) will experience Poynting vector walk-off. If the beam size of input laser is small, the generated beam and input beam will be separated at a walk-off angle (ρ) in the crystal and it will cause low conversion efficiency. Therefore, for focused beam or intracavity doubling, the walk-off is a main limitation to high conversion efficiency.

        13.png


        <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <蜘蛛词>| <文本链> <文本链> <文本链> <文本链> <文本链> <文本链>